BALZER Field Floater, Руководство пользователя

Страница: 9 / 78

9
Safety
MANDATORY SAFETY SHUTDOWN PROCEDURE
BEFORE cleaning, adjusting, lubricating or servicing the unit:
1. Remove the ignition key from the power unit engine.
2. Make sure that all movement of the unit has ceased. ONLY when you have taken these
precautions can you be sure it is safe to proceed. Failure to follow the above procedure, could lead to
death or serious bodily injury.
3. Attach jack to unit and raise up to transfer weight to the jack.
4. Keep hitch pin attached to help prevent unit from accidentally moving.
5. Disconnect the PTO.
ADDITIONAL SAFETY REMINDERS
USER/OPERATOR SAFETY PRACTICES are included in this Operation Manual and are intended
to promote SAFE OPERATION of the unit.
These guidelines do not preclude the use of good judgment, care, and common sense as may be indicated
by the particular job site work conditions.
It is essential that operators be physically and mentally free of mind altering drugs and chemicals and
thoroughly trained in the safe operation of the unit. Such training should be presented completely to all
new operators and not condensed for those claiming previous experience.
Some photographs used in this manual may show Doors, Guards, and Shields open or removed for
illustration purposes
ONLY. BE SURE that all Doors, Guards, and Shields are in their proper operating
positions BEFORE operating the unit. NEVER operate this unit with any guards or shields not in place.
Replace any missing or damaged ones.
Keep hands and feet away from all moving parts.
The operator MUST know the capabilities and work applications for the machine, and operate it at
speeds slow enough to insure complete control at all times. When working on uneven ground or near the
edge of roadbeds, there is no substitute for good judgment and only operators with sufficient experience
should attempt such work.
NEVER assume that everybody is as safety conscious as you are.