
Report No.: BL-SZ1680250-601
5 / 129
1 ADMINISTRATIVE DATA (GENERAL INFORMATION)
1.1 Identification of the Testing Laboratory
Company Name
Shenzhen BALUN Technology Co., Ltd.
Address
Block B, 1st FL, Baisha Science and Technology Park, Shahe Xi Road,
Nanshan District, Shenzhen, Guangdong Province, P. R. China
Phone Number
+86 755 6685 0100
Fax Number
+86 755 6182 4271
1.2 Identification of the Responsible Testing Location
Test Location
Shenzhen BALUN Technology Co., Ltd.
Address
Block B, 1st FL, Baisha Science and Technology Park, Shahe Xi Road,
Nanshan District, Shenzhen, Guangdong Province, P. R. China
Accreditation
Certificate
The laboratory has been listed by Industry Canada to perform
electromagnetic emission measurements. The recognition numbers of
test site are 11524A-1.
The laboratory has been listed by US Federal Communications
Commission to perform electromagnetic emission measurements. The
recognition numbers of test site are 832625.
The laboratory is a testing organization accredited by China National
Accreditation Service for Conformity Assessment (CNAS) according to
ISO/IEC 17025. The accreditation certificate number is L6791.
Description
All measurement facilities used to collect the measurement data are
located at Block B, FL 1, Baisha Science and Technology Park, Shahe Xi
Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China
518055
1.3 Laboratory Condition
Ambient Temperature 20 to 25
℃
Ambient Relative
Humidity
45% - 55%
Ambient Pressure
100 kPa - 102 kPa
1.4 Announce
(1) The test report reference to the report template version v5.3.
(2) The test report is invalid if not marked with the signatures of the persons responsible for preparing and
approving the test report.
(3) The test report is invalid if there is any evidence and/or falsification.
(4) The results documented in this report apply only to the tested sample, under the conditions and modes of
operation as described herein.
(5) This document may not be altered or revised in any way unless done so by BALUN and all revisions are duly
noted in the revisions section.
(6) Content of the test report, in part or in full, cannot be used for publicity and/or promotional purposes without
prior written approval from the laboratory.
Содержание EAP245
Страница 1: ......
Страница 10: ...Report No BL SZ1680250 601 10 129 Run software ...
Страница 27: ...Report No BL SZ1680250 601 27 129 5 7 4 Test Result Please refer to ANNEX A 6 ...