baltur GI 500 MC, Инструкция по установке, использованию и обслуживанию

Страница: 59 / 76

ENGLISH
21 / 36
0006160064_201510
Notes on programmer - Programmer sequence Output signals on terminal board
Time key
Sec.
31,5 t1 Pre-ventilation time with air shutter open
3 t2 Safety time
- t2' Safety time or first safety time with burners that use pilot burners
6 t3 Short pre-ignition time (ignition transformer on terminal 16)
- t3' Long pre-ignition time (ignition transformer on terminal 15)
12 t4 Time between beginning of t2’ and valve consensus on terminal 19 with t2
- t4' Time between beginning of t2’ and valve consensus on terminal 19
12 t5 Time between end of t4 and consensus at power regulator or valve on terminal 20
18 t6 Post-ventilation time (with M2)
3 t7 Time between consent for start-up and voltage at terminal 7 (start delay for fan motor M2)
72 t8 Start-up duration (without t11 and t12)
3 t9 Second safety time for burners that use pilot burners
12 t10 Time from start-up to beginning of air pressure control without effective air shutter stroke time
- t11 Air shutter opening stroke time
- t12 Air shutter in low flame position (MIN) stroke time
18 t13 Admissible post-combustion time
6 t16 Initial delay of consent for air shutter OPENING
27 t20 Time to automatic closure of programmer mechanism after burner start-up
NOTE:
With voltage at 60 Hz the times are reduced by nearly 20%.