baltur BGN 300 DSPGN ME, Инструкция по установке, использованию и обслуживанию

Страница: 48 / 64

ENGLISH
16 / 30
0006160204_201508
• To reclose the electrical panel lid, fix the screws (1) with a tor-
que of about 5 Nm to ensure the correct seal.
To gain access to the control panel (8), slide the transparent door
(7) for a short distance following the direction on the arrow in -
dicated in the figure exerting slight pressure with a tool (e.g. a
screwdriver) following the arrows' direction and slide it for a short
distance to separate it from the cover.
• To secure the transparent door on the panel properly, position
the hooks at their hooking points (9), slide the door in the di-
rection indicated by the arrow until you hear a click that ensures
its seal.
CAUTION / WARNING
Only professionally qualified personnel may open the bur-
ner electrical switchboard.
• In case of unbalanced 230V phase-phase mains supply sy-
stems, the voltage between the flame detector electrode and
earth might not be enough to ensure the correct operation of
the burner. The problem is eliminated using the isolation tran-
sformer type AR1 code 0005020028 which must be connected
as shown in the following diagram.
Ph
Ph 230
ION IN
ION PROBE
AR 1
ION
L (1)
IN (2)
tensione_elettrodi
8
7
0002934780d1
9
9
9
9
0002934780e