Baltmotors ATV200-D Скачать руководство пользователя

Страница: 35 / 58

-24-

Periodic inspection ,adjustment,and lubrication will keep your machine in the safety and most efficient

condition.The points of machine inspection,adjustment,and lubrication are detailed in following.

NOTE

Turn off the engine when maintaining unless specified,Have a our dealer perform service if you are not

familiar with maintenance.

Operation manual and tool kit

You are recommended to put this operation manual in the vinyl bag and lay it under the seat as shown.Put

the tool kit and low -pressure tire gauge in the storage case.

The maintaining information included in this manual is provided you with the necessary information for

completing preventive maintenance and minor repairs by yourself,The tools provided in the tool kit are suffi-

cient for this purpose,except a torque wrench necesary to tighten nuts and bolts.

NOTE

If you do not have a required torque wrench during maintenance,take you machine to a our dealer to check

the torque settings and adjust them as necessary.

PERIODIC MAINTENANCE AND ADJUSTMENT

Содержание ATV200-D



























































Результаты поиска

Содержание ATV200-D

Отзывы:

Похожие инструкции для ATV200-D

Бренды по названию

Популярные бренды

Baltmotors ATV200-D, Руководство пользователя

Результаты поиска

Содержание ATV200-D

Отзывы:

Похожие инструкции для ATV200-D

Бренды по названию

Популярные бренды