background image

User’s and technical staff manual 

Dear customer, 

 

Thank you for purchasing our water heater. 
When purchasing the appliance please check: 

 

Scope of delivery and water heater’s resalable condition; 

 

Compatibility of pressure and type of gas (NG or LPG) used by you with the type of gas indicated in 
sections 15 of the following manual and in the table on the appliance’s. 

You should also require from the selling organization to fill in the warranty repair coupons. 
When purchasing an appliance against a credit, the payment schedule should be drawn up with indica-

tion of full due and payable amount. The payment schedule should be signed by the Customer with the date 
indicated and with print full name.  

The present manual contains information about the order of installation of the appliance and rules of its 

exploitation and technical service, following it will provide long-term failure-free and safe operation of the 
appliance.   

Please get carefully acquainted with this manual and follow its instructions. 
 

Best regards 

Armavirsky Plant of Gas Equipment, Ltd.,

 

 

Telephone number of the unified technical support Service 8 800 555 40 35 

(free call on the territory of Russian Federation, working hours of the service: twenty-four-hour) 

 

 

Installation of the appliance, instruction of the owner on the appliance’s operating principles and rules of exploita-
tion, technical service, failure elimination and repair are effectuated only by a specialized service organization.  
Checking and cleaning of the exhaust flue, repair of water communications are performed by residential operational 
services upon request of the appliance’s owner. 
The responsibility for safe exploitation of the appliance and its maintenance in appropriate condition is on its owner. 
Non-compliance with the safety measures and installation rules, rules of use and technical service, can cause fire, 
burn, gas poisoning or poisoning with carbonic oxide (CO). 

 

Armavirsky Plant of Gas Equipment Ltd. Is constantly working on improvement of output products and re-
serves the right for insertion of necessary changes in the water heater’s construction. The following changes 
might not be displayed in the user’s manual. 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
30.05.2013 
 
 

Содержание NEVALUX-5611





























Отзывы: