BALTENSWEILER PIO S, Руководство по эксплуатации, Страница: 10 / 12

DE
Operating instructions
Do not connect the luminaire to the power supply until it has been pla-
ced and all packaging has been removed.
2
3
1
The joints have been tested and adjusted at the factory. If a
joint is too loose, the allen screw must be tightened from the
90° position shown.
Attention:
Over-tightening can damage the joints.
620 mm
620 mm
Button
1
90°
90°
The magnetic contact must lie cleanly on the rod during
operation so that contact and consequently correct
current conduction can be ensured.
Switching On / Offand dimming via button on luminaire head:
Switching: Press the button shortly.
Dimming: Keep the button pressed (step dimming).
Important note: The luminaire must not be operated
with an external dimmer.
90°
max. 90°
Magnetic contac
2
90°
Do NOT over-
wind!
3
Control gear
3
Correct Incorrect
8