Do not shine the LEDs directly into eyes!
Correct disposal / Luminaire must not be disposed of wit the normal household waste.
The luminaire may only be installed in dry interior spaces.
External dimmers (including wall-mounted dimmers) are NOT permitted and can damage the LEDs and the
control gear.
Protection class II: Equipment with protection class II has reinforced or double insulation between the active
and accessible parts equal to the rated insulation voltage.
Care instructions: Disconnect the power supply. Wipe with a damp cloth. Do not use abrasive, alcoholic or
electrostatically charged cleaning utensils. Do not touch or clean the LEDs (mechanical / chemical / electrostatic
damage to the LEDs).
The luminaire may only be used with a mains voltage of 220-240 V 50/60 Hz. For mounting, observe the stat-
utory installation and safety regulations. Always disconnect the power supply when carrying out installation,
cleaning or maintenance tasks. Repairs may only be carried out by the manufacturer or by a qualified specialist
in accordance with the applicable standards. In the event of incorrect installation or that the luminaire has been
tampered with, all warranty claims shall be rendered invalid, as will the manufacturer’s product liability obliga-
tion in accordance with the European Directive concerning Liability for Defective Products (85/374/EEC) and the
Swiss Federal Law on Product Liability (PrHG). BALTENSWEILER shall assume no liability for any loss or damage
to persons or property caused by improper handling or non-adherence to the safety regulations!
Do not touch the luminaire in the area of the optic and LED during operation – it gets very hot. The luminaire
must not be loaded and equipped with objects that are not part of the product (risk of breakage / falling), and
must not be covered with objects (e.g. textiles) during operation (fire hazard). Keep optic and LED free of dirt
and foreign particles (follow the care instructions). Such impurities can lead to increased heat generation which
can destroy the luminaire.
LEDs are permanently installed and may only be replaced by the manufacturer.
Technical conformity in accordance with EN directives.
Protection class IP20:
Protection against contact with fingers and medium-sized solid foreign bodies ø ≥ 12 mm.
!
IP20
Electronic components are sensitive to electrostatic discharge and can be destroyed if the connections are
touched. Suitable protective measures against ESD (Electro Static Discharge) must be taken.
EN
Protection classes, safety regulations and instructions
4
