5
Illustration # 3
D
P-7
A
G
F
C
A1
P-9
P-1
Be sure that arrow on
top of Camlock (C)
aligns with centerline of
Edge Drilled hole.
Phillips
Screwdriver
Centerline of
Edge Drilled
hole.
Arrow
12.
11.
13.
17.
To Secure Cam Locks, Insert
Large Phillips Head Screwdriver
and turn Cam Lock 1/4 turn (90
degrees) clockwise.
B
Place the Right Side Panel (P-1) with the Predrilled holes
facing up and install 2 each Cam Posts (D) in the 2
threaded insert nuts (Pre-installed) as shown
in illustration # 3.
Install 2 each Dowels (E) into the holes as shown in illustration # 3.
Attach Right Side Panel (P-2) to Right Leg (P-7 ) as shown in
illustration # 3. Secure by turning the Cam Locks (C) 1/4 turn until they lock.
Attach Right Keyboard Slide (P-9) to the Right Side Panel (P-2) using 2
each Screws (B) as shown in illustration #3.
Attach 1 Glide Bracket (F) using 1 Socket Screw (A) and 1 Interior
Threaded Post (B) as shown in illustration #3. Tighten Screws using Phillips
Screwdriver.
Insert 1 Glide (G) into the Glide Bracket (F)
as shown in illustration #3.
P-2
14.
15.
16.