3
1.)
R
EAD
T
HROUGH
I
NSTRUCTIONS
FROM
BEGINNING
TO
END
BEFORE
STARTING
TO
ASSEMBLE
UNIT
.
NIDO Flipper Table
Assembly Instructions
2.)
Illustration # 2
Place the Table Top (P1) face down on a padded surface. Place the Upper Leg Assembly
(P2) over the embedded threaded inserts in the bottom of the Table Top (P1) and attach
using four Screws (A) as shown in Illustration #1. Finger tighten only at this point.
Identify and seperate all the parts and hardware.
Illustration # 1
P1
P2
A
A
P2
P1
A
F
A
3.) Place the Top Support (P5) between the right and left upper legs of the Upper Leg
Assembly (P2). Attach the Top Support (P5) to each leg using two Screws (A). Attach
the Top Support(P5) to the Table Top (P1) using one Screw (F). Tighten all Screws
at this time using Allen Wrench (D) as shown in Illustration #2.
P5
