3
Assembly Diagram
Identify and Separate all the Parts and Hardware.
Illustration # 1
R
EAD
T
HROUGH
I
NSTRUCTIONS
FROM
BEGINNING
TO
END
BEFORE
STARTING
TO
ASSEMBLE
UNIT
.
1.)
2.)Screw on two Locking Casters (A)
into the front embedded threaded inserts
in the bottom of the Base (P-1) using
three Screws (L ) as shown in Illustration # 1.
Tighten Screws with Allen Wrench (E).
Screw on two Non-Locking Casters (B)
into the rear embedded threaded inserts
in the bottom of the Base (P-1) using
three Screws (L ) as shown in Illustration # 1.
Tighten Screws with Allen Wrench (E).
3.)
4.) Push in six Wood Dowels (F) into the predrilled
holes in the top of the Base (P1) as shown in
Illustration #2. Screw six Cam Posts (H) into the
embedded threaded inserts in the top of the Base.
Illustration # 2
P1
F
Front
Set the completed Base to the side at this time.
A
B
P1
Front
L
L
B
H
H
