4
The Balt product you have purchased is guaranteed against material and workmanship defects. This
guarantee extends 1 year from date of purchase. Should this product fail to function satisfactorily under normal
use due to defect or imperfection, the defective part or product will be replaced. Damage caused by common
carriers during shipment is not included in this guarantee.
This guarantee sets forth all applicable guarantees and remedies. No other warranty, expressed or
implied shall apply. Failure to follow instructions found in Important Information Section of Owner
Sheet shall void the guarantee. Consequential or incidental damages and or costs are not refundable.
Important
Cap
Grommet(F) installation
Illustration #5
Sleeve
Grommet (F)
Sleeve
Cap
To install Grommet (F), separate parts
and press Grommet Sleeve in Round
opening in Top Platform (P1) as shown
in illustration #5. Snap plastic Cap into
Sleeve as shown in illustration #5.
P1
Slide 2 Lower Leg Inserts (P3) into the Upper Leg
Receivers (P2). Secure at desired height using 4
Screws (A) as shown in illustration #4.
Tighten all the screws at this time
using Allen Wrench (G).
Attach 2 Locking Casters (D) to the front of
the 2 Lower Leg Inserts (P3) and 2 Casters
(E) to the back of the Lower Leg Inserts (P3).
(Use 4 each (C) Leveling Glides in place of
Casters for stationary use.)
Tighten all Casters using Caster Wrench (H).
5.)
6.)
7.)
8.)
9.)
A
A
D
P3
E
P3
Illustration #4
P2
P2
89847-03/14/06