5
Place the Left Side Panel (P-1) with the Predrilled
holes facing up and install 2 Cam Posts (D) in the 2
threaded insert nuts (Pre-installed) as shown
in illustration # 2.
Install 2 Cam Locks (C) in the 2 large holes.
Install 8 Wood Dowels (E) into
the holes as shown in illustration # 2.
Illustration # 3
5.
6.
E
E
P-1
D
P-2
D
E
Place the Right Side Panel (P-2)
with the Predrilled holes facing up
and install 2 each Cam Posts (D) in
the 2 threaded insert nuts (Pre-
installed) as shown in illustration # 3.
Illustration # 2
Place the Divider Panel (P-4) with the Pre-drilled holes facing up and
install 2 Cam Locks (C) in the 2 large holes as shown in illustration # 4.
Slide 6 Wood Dowels (E1) Through 4 holes until they protrude the same
on both sides.
Attach 2 Magnets (K) using 4 Screws (A7) as shown in illustration # 4.
4.
8.
7.
C
Illustration # 4
10.
C
E
P-1
Be sure that arrow on
top of Camlock (C)
aligns with centerline of
Edge Drilled hole.
Phillips
Screwdriver
Centerline of
Edge Drilled
hole.
Arrow
Note:
Camlocks can be turned with Allen Wrench, or Large Phillips Screwdriver
P-4
E1
11.
9.
K
A7
K
A7
12.
Install 2 each Cam Locks (C) in the 2 large holes.
Install 8 Wood Dowels (E) into the holes as shown in
illustration # 3.
E1
C
