5
F2
8.)
9.)
P-3
P-9
The Balt product you have purchased is guaranteed against material and workmanship defects. This
guarantee extends 1 year from date of purchase. Should this product fail to function satisfactorily under normal
use due to defect or imperfection, the defective part or product will be replaced. Damage caused by common
carriers during shipment is not included in this guarantee.
This guarantee sets forth all applicable guarantees and remedies. No other warranty, expressed or
implied shall apply. Failure to follow instructions found in Important Information Section of Owner
Sheet shall void the guarantee. Consequential or incidental damages and or costs are not refundable.
Important
P-6
Insert 1 Grommet Sleeve
(F1) in Round opening in the
LCD Platform (P-3); Insert 1
Grommet Sleeve (F1) in
Round opening in Middle
Shelf (P-6) as shown in
illustration #5.
F1
F2
F1
P-1
P-2
Attach Right Shelf Bracket (P-8) and
Left Shelf Bracket (P-9) to the Right &
Left Leg Assemblies at the desired
height as shown in illustration # 5.
(Tighten 4 screws
under Laptop Shelf
(P-4)
using Allen Wrench (G)).
(Tighten all the screws at this
time using Allen Wrench (G)).
P-4
Attach Right Shelf Bracket (P-9) and Left Shelf
Bracket (P-10) to Laptop Shelf (P-4) using 4 Flat
Head screws (A) as shown in illustration # 4.
(Finger tighten only)
A
P-7
P-8
P-9
Illustration # 4
Illustration # 5
A
Snap 2 Grommet Caps (F2)
into Grommet Sleeve (F1).
10.)