12
DC IN 15V
DC OUT 5V
FUSE
EX SPEAKER
ANT
-
+
Illustration # 20
Illustration # 21
Illustration # 23
Remove cap from bottom for
Microphone (amp1) and install
9 volt battery as shown
in illustration #20. Replace cap.
Slide Antennae (P-17) over ANT Mount on
back of Amplifier (P-16) as shown in illustra-
tion #21. Twist collar 90 degrees to lock in
place.
Attach 2 speaker wires to EX SPEAKER
Clips on back of Amplifier (P-16). Attach
positive wire(wire with dash lines) to the EX
SPEAKER Clip marked “+” as shown in
illustration #22.
Attach Negative wire(wire without dash lines)
to the EX SPEAKER Clip marked “-
DC IN 15V is the plug in for the Recharging
Transformer. Amp should be plugged in and
charged for 4 hours before 1st use.
DC OUT 5V is the Outlet for the lamp. Plug
Lamp ( P15) into this outlet.
29.
30.
31.
33.
31.
34.
P-18
P-16
P-17
Insert Electric Cord (P-20) in the end
of Battery Charger (P-19) as shown in
illustration #19.
Illustration # 22
P-20
P-19
32.
#2
# 27534