Installation and operation
The VARIABOX can be used as a wall combination or as a portable power distributor. In both cases,
the supply cable is connected in the same way (see Connecting the supply cable [
}
13]).
The OTC flaps can be locked securely with the lock fittings (available separately as accessories) at the
openings provided for this purpose. All VARIABOX housings can be sealed from the top to the bot-
tom.
Changing the opening direction of the housing cover
If the local conditions require that the housing cover's direction of opening needs to be changed, pro-
ceed as follows:
1. Loosen the captive housing screws and open the VARIABOX.
2. Loosen the screws (1), with which the hinges are fixed to the housing and remove the hinges.
3. Push the hinge piece to the side and replace the screw (1) in the borehole (maximum torque
1 Nm).
4. Loosen the screws (2), with which the hinges are fixed to the cover and remove the hinges.
5. Fix the hinges to the other side of the housing in the reverse order, and pay attention to the
marking ("A", "B").
6. Fix the hinge with screws to the cover (maximum torque 1 Nm).
ð
In this way, you have changed the direction of opening of the housing cover.
6
6.1
Installation and operating manual VARIABOX
(11.2016)
10 / 20