Baloran Triko, Руководство пользователя, Страница: 14 / 22

14
MASTER D-MOD
Mod=Lev Amp=25
Controlling of the destination and amplitude of the dynamic modulation
The Triko allows to modulate some parameters through the information of a source: envelope of the entry
signal, Midi velocity, Midi knob or Midi Aftertouch Channel. MOD allows to select the destination of this
modulation:

Non = (None) None

Amp = (Amp) Volume of modulation ( + eventual over-modulation) of Choruses

Rat = (Rate) Speed of Chorus modulation

Bth = (Both) Volume and speed of the Chorus modulation

Fx = (Effect) Volume of the master effect (summation of Choruses)

Dry = (Dry) Volume of master direct signal

CFi = (Card Filter) Volume of filter of optional card

Cde = (Card Delay) Delay of optional card

CFb = (Card Feedback) Volume of filter of optional card

CRa = (Card Rate) Speed of modulation of optional card

CMo = (Card Modulation) Amplitude of modulation of optional card

CHp = (Card Head/Param) Specific parameters of optional card

CLv = (Card Level) Volume of the effect of optional card

Amp (0..100) sets the amplitude of the dynamic modulation.
Amp (0..100) règle l’amplitude de la modulation dynamique.
MASTER D-SRC
Src=Aud
Setting the source of dynamic modulation source.
Src allows to choose the source of dynamic modulation.

Aud = (Audio) Envelope of input signal

Vel = (Velocity) Velocity of the last Midi note

MWh = (Mod Wheel) Knob of Midi modulation (CC1)

Aft = (Aftertouch) Midi Channel Aftertouch

CC4 = Midi Control Change 4 (Foot)

CC7 = Midi Control Change 7 (Volume)

C11 = Midi Control Change 11 (Expression)
Chorus 1, 2 and 3
CHOR.n OUTPUT
Vol=+10 Pan= 2<
Control of volume and balance of Chorus "n".
(see Use / Controls of volume and balance)
Vol sets the damping of the summation of Chorus "n" and Pan the balance of this signal.