www.balmar.net / Customer Service: +1 (360) 435-6100 x 1 / Technical S1 (360) 435-6100 x 3
Basic Programming
Programming For Battery Type
The MC-614 features selectable programs for the following battery technologies; Standard
Flooded (FSb), Flooded Deep Cycle (Fdc), Gel (gEL), AGM (AgL), Optima (OPS), factory
default program (UFP), Voltage Sensitive Halogen Equipment (HAL), and LiFePO
4
(LFP).
Other Basic Programming features include programming the Belt Load Manager, programming
for Short or Long Display Mode, and programming for Alternator Failure Advisory Mode (BDL).
MC-614 Installation & Operation Manual Available Online!
Scan QR Code
To Access
Installation &
Operation Manual
For more details on the basic
and advanced programming
features included in the
MC-614, you can download
the full Installation &
Operation Manual.
www.balmar.net/operation-manuals
1
www.balmar.net / Customer Service: +1 (360) 435-6100 x1 / Technical Support: +1 (360) 435-6100 x3
Balmar, LLC
15201 39th Avenue NE, Marysville, WA 98271
www.balmar.net
INSTALLATION AND OPERATION MANUAL
Introduction
The Balmar Max Charge MC-614
is the latest generation of
smart, multi-stage Balmar Max Charge voltage regulators. Designed
to provide precise voltage control for Balmar
’
s high-output 12-volt
alternators and other externally regulated P-type alternators, the
MC-614 features user selectable programs for the following battery
AGM, and LiFePO
4
batteries. The regulator also features a universal
default program that
’
s designed for use in vessels utilizing voltage
sensitive halogen equipment.
In addition to the user selectable preset programs, the MC-614
features a wealth of advanced programming modes which make it
possible to tailor charging to a wide variety of environments.
When used in conjunction with optical MC-TS-A and MC-TS-B
alternator and battery temperature sensors, the MC-614 features
the ability to monitor and respond to a range of ambient temperature
conditions, including reduction or discontinuation of charging
voltages, should a catastrophic over-temperature condition occur at
the alternator or the batteries.
Safety Considerations
1.
Always disconnect your battery banks and
ensure that switches are “OFF” prior to
installing your regulator.
2.
which could become entangled in your
motor or other machinery prior to installing
regulator.
3.
Wear ANSI-approved safety eye-wear and
protective gear.
4.
DO NOT attempt to modify the regulator.
your charging system, and will void your
warranty.
5.
DO NOT attempt installation if you are tired
or fatigued.
6.
Ensure that the engine has cooled before
initiating installation.
7.
DO NOT attempt regulator installation while
using alcohol or medication that could
impair your judgment or reaction time.
8.
Always use the right tool for the job.
Improper tool use may damage regulator
or your vessel, and could result in personal
injury.
9.
Take time to read the manual. Equipment
damage and possible injuries may result
from an incomplete understanding of the
installation and operation of the MC-614
regulator. If you are unfamiliar with marine
electrical systems, consult with a licensed
marine electrician.
MAX CHARGE MC-614
MULTI-STAGE
VOLTAGE REGULATOR
©2017 Balmar LLC REV.A 3/15/17
Introduction
1 Regulator Programming
9
Safety Considerations
1 Basic Programming
9
Regulator Installation
2 Adjust For Battery Type
9
Unpacking Box
2 Belt Load Manager
10
Locate/Mount Regulator
2 Dash Lamp Source
10
Basic Wiring Installation
2 Advanced Programming
11
LiFEPO
4
2 Unlock Adv. Programming
11
Regulator Terminal Layout
3 Adjust Adv. Programming 11-12
Installation By Wire
4-6 Default Program Settings
12
Initial Start Up
6 Battery Equalization
12
Regulator Operation
7 Add’l. Regulator Features
13
Regulator Display Modes
8 Troubleshooting
13-15
Using Magnetic Tool
9 Warranty
16
Table of Contents
MC-614
QUICK START GUIDE
