Balluff MICROPULSE+ BTL7-A501-M Series, Руководство пользователя

Страница: 38 / 120

14 english
6.1 Value table for factory setting
Output gradient Transducer Unit Min. value Null value End value Max. value Error value
Rising
(output 1)
BTL7-A… V
−
0,5 0 +10,0 +10,5 +10,5
BTL7-G… V − 10,5 − 10,0 +10,0 +10,5 +10,5
BTL7-C… mA 0 0 20,0 20,4 20,4
BTL7-E… mA 3,6 4,0 20,0 20,4 3,6
Falling
(output 2)
BTL7-A… V +10,5 +10,0 0
−
0,5
−
0,5
BTL7-G… V +10,5 +10,0 − 10,0 − 10,5 − 10,5
BTL7-C… mA 20,4 20,0 0 0 20,4
BTL7-E… mA 20,4 20,0 4,0 3,6 3,6
Tab. 6-1: Value table for factory settings
NOTICE!
Interference in function
Configuration with the Micropulse Configuration Tool
while the system is running may result in malfunctions.
►
Stop the system before configuration.
6.2 Micropulse Configuration Tool
The BTL7-A/C/E/G501-… transducer can be configured
quickly and simply on a PC using the Micropulse
Configuration Tool PC software.
The most important features include:
– Online display of the current position of the magnet
– Graphical support for setting the functions and curves
– Display of information on the connected transducer
– Selectable number formats and units for display
– Resetting to factory settings is possible
– Demo mode without having transducer connected
The PC software and associated
manual can be found in the Internet under
www.balluff.com.
6
Configuration with the Micropulse Configuration Tool
6.3 Connecting the USB communication box
With BTL7-A/C/E/G501-… transducers with connectors
(S32/S115), the communication box must be looped in
between the transducer and controller. The communication
box is connected to the PC via a USB cable.
Fig. 6-1: Connecting the communication box with a connector
With a BTL7-A/C/E/G501-…-KA_ _ transducer, the
communication lines La, Lb and GND must be connected
to the USB communication box.
Fig. 6-2: Connecting the communication box with a cable connection
When reading or writing data via the
Configuration Tool, both LEDs flash green.
USB cable
6-pin 8-pin
Connection cable approx. 0.3 m with
S32 or S115 (female) connector
Connection cable
approx. 0.3 m with
S32 or S115 (male)
connector
Controller
Controller
USB cable
8-pin
Connection cable
approx. 0.6 m with
luster terminal
BTL7-A/C/E/G501-M _ _ _ _ -P-S32/S115/KA _ _
Micropulse Transducer in a Profile Housing