Balluff LD2-T048-03-S75, Руководство пользователя

Страница: 39 / 144

www.balluff.com 17 english
7.1 Accuracy
The data are typical values for
BIP LD2-T_ _ _-03-S75 at 24 V DC and room temperature.
The values apply when using the standard target
BAM TG-XE-001.
Type BIP length L
[mm]
Measuring
range
S
a
min. [mm]
Measuring
range
S
a
max. [mm]
Linearity error
max. 5…95% of
S
a
[µm]
Linearity error
max. 100…% of
S
a
[µm]
Effective
operating
distance S
e
[mm]
BIP LD2-
T048
-03-S75 64.0 0 48 ±300 ±400 24.0
BIP LD2- T070 -03-S75 92.5 0 70 ±300 ±300 35.0
BIP LD2- T103 -03-S75 121.0 0 103 ±300 ±300 51.5
BIP LD2-
T133
-03-S75 149.5 0 133 ±300 ±400 66.5
Repeat accuracy R ±80 µm
7.2 Ambient conditions
Ambient temperature T
a
–25 °C…+85 °C
Storage temperature –25 °C…+85 °C
Temperature drift max. of end value ±1,5 %
Shock rating
per EN 60068-2-27
30 g/11 ms
Vibration
per EN 60068-2-6
55 Hz, 1 mm
amplitude 33 × 30
min.
Degree of protection per IEC 60529 IP67
(when attached)
7.3 Power supply
Voltage U
b
, regulated
2)
18…30 V DC
Rated operating voltage U
e
24 V DC
Ripple ≤ 15 % (of U
e
)
No-load current I
o
at U
e
≤ 35 mA
Short-circuit protection Yes
Protection against possibility of
miswiring
Yes
Reverse polarity protection Yes
1)
7.4 IO-Link interface
Specification IO-Link 1.1
Transfer rate 38.4 kBaud (COM2)
Process data 2 bytes
Output value
Position value at Slmin 0x0000
Position value at Slmax 0x0FFF
Data format 16 bit unsigned
integer
Cycle time ≥ 3 ms
Master-device process data 0 bytes
Device-master process data 2 bytes
7.5 Mechanical data
Housing material Plastic (PBT)
Active surface material Plastic (PBT)
Tightening torque 3 Nm
1)
For : Use in enclosed spaces and up to an altitude of 2000 m
above sea level.
2)
For : The BIP must be connected externally to a power-limited
circuit according to UL 61010-1 or a power source of limited output
according to UL 60950-1 or a power supply with Protection Class 2
according to UL 1310 and UL 1585.
7
Technical data
BIP LD2-T_ _ _-03-S75
Inductive Positioning System