BVS HS-QC
Handheld Barcode Reader
www.balluff.com
10
LED and Beeper Indications
29
10
LED and Beeper Indications
The reader’s beeper sounds and its top multi-colour LED illuminates to
indicate various functions or errors on the reader. The green LED Spot
backprojected on the code provides a reliable feedback to the user.
The following tables list these indications. One exception to the behav-
iors listed in the tables is that the reader’s functions are programmable,
and so may or may not be turned on. For example, certain indications
such as the power-up beep can be disabled using programming bar-
code labels.
Indicator
Description
LED
Beeper
Power-up
Beep
The reader is in
the process of
powering-up.
Reader beeps
four times at high-
est frequency and
volume upon
power-up.
Good Read
Beep
A label has
been success-
fully scanned by
the reader.
LED behavior for
this indication is
configurable via the
feature “Good
Read: When to
Indicate” (see the
OPM for informa-
tion.)
The reader will
beep once at cur-
rent frequency,
volume, mono/bi-
tonal setting and
duration upon a
successful label
scan.
ROM Fail-
ure
There is an error
in the reader's
software/pro-
gramming
Flashes
Reader sounds
one error beep at
highest volume.
Limited
Scanning
Label Read
Indicates that a
host connec-
tion is not
established.
N/A
Reader 'chirps'
six times at the
highest fre-
quency and cur-
rent volume.
Reader
Active
Mode
The reader is
active and
ready to scan.
The LED is lit
steadily
a
N/A
Reader
Disabled
The reader has
been disabled
by the host.
The LED blinks
continuously
N/A
Green LED
Spot
a
flashes
momentarily
Upon successful
read of a label,
the software
shall turn the
green spot on for
the time speci-
fied by the con-
figured value.
N/A
N/A
a
Except when in sleep mode or when a Good Read LED Duration other than
00 is selected
