Balluff BTL7-T500 Series, Руководство по настройке

Страница: 78 / 82

www.balluff.com 37 english
Parameters Subindex Entry Format Access Default value Comment
918 PROFIBUS slave address Unsigned16 125 See sections
4.1 and 4.11.5
922 Telegram selection Unsigned16 (6) ro 16#0051 = 81 See section 4.4
81: Standard telegram
59001: 1 position value
59002: 2 position values
…
59016: 16 position
values
59033: FMM position
values
59017: 1 position and
speed value
59018: 2 position and
speed values
…
59032: 16 position and
speed values
59034: FMM position
and speed values
964 Drive ID Array[5] of
Unsigned16
ro See section 4.11.4
0 Manufacturer ID Unsigned16 (6) 16#0378 = 888
1 Drive unit type Unsigned16 (6) 16#DB01 =
56065
2 Firmware version Unsigned16 (6)
3 Firmware date, year (dec) Unsigned16 (6)
4 Firmware date (decimal):
day x 100 + month
Unsigned16 (6)
965 Profile identification OctetString[2]
(10)
ro See section 4.11.4
Byte 1: PROFIdrive 16#3D = 61 PROFIdrive
Byte 2: Version 16#1F = 31 Version (31 only in
compatibility mode)
16#29 = 41 otherwise 41
970 Load preset values of the
local parameters
Unsigned16 rw 0 See section 4.11.2
Value = 0: preset
Value = 1: Load
complete default settings
(After the default state is
loaded successfully, the
value switches back to 0)
971 Write local parameters to
non-volatile memory.
Unsigned16 rw 0 See section 4.11.2
Preset value: 0
value = 1: Start saving.
Saving continues until
the value returns to 0
itself.
972 Reset Unsigned16 rw Writing a 1 in this
parameter performs an
immediate reset. See
section 4.11.3
6
Appendix
BTL7-T500-…
Configuration Guide