Balluff BTL5-H1xx-Mxxxx-P-S94 Series, Руководство пользователя

Страница: 33 / 112

www.balluff.com 9 english
4
Installation and connection (continued)
4.3 Floating magnets
Note when installing the magnet:
– To ensure the accuracy of the linear position sensor,
the magnet is attached to the moving member of the
machine using non-magnetizable screws (stainless
steel, brass, aluminum).
– The moving member must guide the magnet on a
parallel line to the BTL.
– Distance A between the magnet and parts made of
magnetizable material must be kept to at least 10 mm
(see Fig. 4-4 to Fig. 4-8).
– For distance B between the magnet and the BTL and
for the center offset C (see Fig. 4-4 to Fig. 4-8) the
following values must be maintained:
Magnet type Distance B
1)
Offset C
BTL5-P-3800-2 0.1…4 mm ± 2 mm
BTL5-P-5500-2 5…15 mm ± 15 mm
BTL5-P-4500-1 0.1…2 mm ± 2 mm
BTL6-A-3800-2 4…8 mm
2)
± 5 mm
BTL6-A-3801-2 4…8 mm
2)
± 5 mm
1)
The selected distance must remain constant over the entire stroke length.
2) For optimal measuring results a distance B of 6…8 mm is recommended.
Tab. 4-2: Distance and offset for floating magnets
Fig. 4-4:
C
50+4
A A
55+4
1
B
Dimensions and spacing with magnet BTL5-P-3800-2
Fig. 4-5:
61+10
66+10
1
C
B
A A
Dimensions and spacing with magnet BTL5-P-5500-2
Fig. 4-6:
69+4
74+4
1
C
B
A A
Dimensions and spacing with magnet BTL6-A-3800-2
Fig. 4-7:
58+4
63+4
1
C
B
A A
Dimensions and spacing with magnet BTL6-A-3801-2
Fig. 4-8:
57.5+2
16.5
1
B
A
A
C
4
Dimensions and spacing with BTL5-P-4500-1
electromagnet (24 V/100 mA)
The measuring range is offset by 4 mm towards
the BTL plug (see Fig. 4-8).
BTL5-H1_ _ -M _ _ _ _ -P-S94
Magnetostrictive Linear Position Sensor – Profile Style