Balluff BTL304K, Руководство пользователя, Страница: 35 / 114

www.balluff.com 11 english
4.4 Electrical connection
Depending on the model, the electrical connection is made
using a cable or a connector.
The connection or pin assignments for the respective
version can be found in Tab. 4-3.
Note the information on shielding and cable
routing on page 12.
S32
Pin
KA
Wire color
BTL7-… interface
-C508 -C509 -C512 -C513 -E508 -E509 -E512 -E513
1 YE yellow 0…20 mA
2)
0…20 mA
2)
20…0 mA
2)
20…0 mA
2)
4…20 mA
2)
4…20 mA
2)
20…4 mA
2)
20…4 mA
2)
2 GY gray 0 V
3 PK pink 0…10 V 3) 10…0 V 3) 0…10 V 3) 10…0 V 3) 0…10 V 3) 10…0 V 3) 0…10 V 3) 10…0 V 3)
4
RD red La (communication line)
5 GN green Not used
1)
6 BU blue GND
4)
7 BN brown 10…30 V
8 WH white Lb (communication line)
1) Unassigned leads can be connected to the GND on the controller side but
not to the shield.
2)
Factory setting, can be freely configured with the PC software.
3)
Referred to as output 2 in PC software.
4) Reference potential for supply voltage and EMC-GND.
Tab. 4-3: Pin assignment of connector S32/KA_ _
4
Installation and connection (continued)
Fig. 4-9: Pin assignment of S32 connector (view of connector pins of
BTL)
BTL7-C/E5_ _-M _ _ _ _ -P-S32/KA _ _
Magnetostrictive Linear Position Sensor – Profile Style