Balluff BOS R254K-UUI-PR10-S4, Руководство пользователя

Страница: 20 / 74

4 english
1.1 Validity
This guide provides all of the information required to safely
use the BOS R254K-… sensor with analog current and
IO-Link interface.
It applies to the following models:
–
BOS R254K-UUI-PR10-S4
Order code: BOS0286
Retroreflective sensor
– BOS R254K-UUI-RS10-S4
Order code: BOS0289
Through-beam sensor – Emitter
– BOS R254K-UUI-RE10-S4
Order code: BOS0288
Through-beam sensor – Receiver
Read this guide and the other applicable documents
completely before installing and operating the product.
Original User’s Guide
This guide was created in German. Other language
versions are translations of this guide.
© Copyright 2020, Balluff GmbH
All content is protected by copyright. All rights reserved,
including the right to reproduce, publish, edit and translate
this document.
1.2 Other applicable documents
Additional information about this product can be found at
www.balluff.com on the product page, e.g. in the
following documents:
– Data sheet
– Declaration of Conformity
– Disposal
1.3 Symbols and conventions
Individual action instructions are indicated by a preceding
triangle.
►
Instruction 1
Action sequences are numbered consecutively:
1. Instruction 1
2. Instruction 2
Numbers
unless otherwise indicated are decimals
(e.g. 23). Hexadecimal numbers are represented with a
preceding 0x (e.g. 0x12AB).
Note, tip
This symbol indicates general notes.
1.4 Explanation of the warnings
Always observe the warnings in these instructions and the
measures described to avoid hazards.
The warnings used here contain various signal words and
are structured as follows:
SIGNAL WORD
Type and source of the hazard
Consequences if not complied with
►
Measures to avoid hazards
The individual signal words mean:
CAUTION
The general warning symbol together with the signal
word CAUTION indicates a hazard which can lead to
slight or moderate injuries
.
DANGER
The general warning symbol in conjunction with the
signal word DANGER identifies a hazard which, if not
avoided, will certainly result in death or serious
injuries .
1.5 Technical terms and abbreviations used
SIO Standard Input Output
1
About this guide
BOS R254K-UUI-PR/RS/RE10-S4
Photoelectric Sensors