Balluff BOS R254K-UUI-LH10-S4, Руководство пользователя

Страница: 28 / 74

12 english
The specifications are typical values for 24 V DC at room
temperature.
The sensor is fully operational immediately, with full
accuracy after warm-up.
Further data can be found at
www.balluff.com
on the product page.
9.1 General features
Light emitter Laser
Light type Red light
Wave length 655 nm
Beam characteristic Focus typically at
400 mm
Usage category DC13
Laser class per IEC 60825-1:2014 1
Average power P
o
≤ 280 μW
Pulse duration t ≤ 100 μs
Pulse frequency
Standard mode 500 Hz
Speed mode 1000 Hz
9.2 Ambient conditions
Ambient temperature −10...+70 °C
Storage temperature −10...+70 °C
Protection per IEC 60529 (when
threaded together)
IP67, IP69K
Ambient light ≤ 10 kLux
9.3 Detection range/Measuring range
Range S
n
≤ 250 mm
Range S Adjustable
Temperature drift (% of S
n
) ≤ 10%
Light spot size at 200 mm 1.3 × 0.4 mm
9.4 Electrical data
Operating voltage
SIO 10...30 V DC
IO-Link 18...30 V DC
Rated operating voltage U
e
24 V DC
Rated operating current I
e
100 mA
No-load current I
o
at U
e
≤ 30 mA
Rate insulation voltage U
i
75 V DC
Readiness delay t
v
300 ms
Load capacity at U
e
≤ 100 nF
Residual current I
r
≤ 500 μA
Residual ripple (% of U
e
) ≤ 10%
Switching frequency
Standard mode 250 Hz
Speed mode 500 Hz
Protection class II
Voltage drop U
d
at I
e
≤ 2.5 V
Short circuit protection yes
Protection against miswiring yes
Polarity reversal protected yes
9.5 Electrical connection
Connection Plug M12x1
Number of pins 4
9.6 Output / Interface
Output pin 4 (switching) Switching output/IO-Link
Switching output pin 4 push-pull
Input/output pin 2 (switching) Switching output/current
analog output/digital
input
Switching output pin 2
(switching)
PNP/NPN/push-pull
Analog output pin 2 4…20 mA
Switching function (switching) NO contact/NC contact
(NO/NC)
Interface IO-Link
Version 1.1
Baud rate COM3 (230.4 kBaud)
9
Technical data
BOS R254K-UUI-LH10-S4
Photoelectric Sensors