Balluff BOS R254K-UUI-LE10-S4, Руководство пользователя

Страница: 23 / 84

www.balluff.com 5 english
2.1 Intended use
The BOS photoelectric sensor, together with a machine
controller (e.g. PLC), comprises a recognition system. It is
intended to be installed into a machine or system and used
in the industrial sector.
Proper function according to the specifications in the
technical data is only assured when the product is used
solely as described in the user’s guide and the respective
documents as well as in compliance with the technical
specifications and requirements and only with suitable
original Balluff accessories.
Otherwise, there is deemed to be unintended use.
Unintended use is not permitted and will result in the loss
of warranty and liability claims against the manufacturer.
2.2 Reasonably foreseeable misuse
The product is not intended for the following applications
and areas and may not be used there:
– In safety-oriented applications in which personal safety
depends on the device function
– In explosive atmospheres
2.3 General safety notes
Activities such as installation , connection and
commissioning may only be carried out by qualified
personnel.
Qualified personnel are persons whose technical
training, knowledge and experience as well as knowledge
of the relevant regulations allow them to assess the work
assigned to them, recognize possible hazards and take
appropriate safety measures.
The
operator is responsible for ensuring that local safety
regulations are observed.
In particular, the operator must take steps to ensure that a
defect in the product will not result in hazards to persons
or equipment.
The product must not be opened, modified or changed. If
defects and unresolvable faults occur in the product, take
it out of service and secure against unauthorized use.
This is a product of
Laser Class 1 (per IEC 60825-
1:2014), for which no additional protection measures are
required. Nevertheless, you must avoid looking directly into
the laser beam to prevent temporary irritation of the eyes.
Complies with 21 CFR 1040.10 and 1040.11 with the
exception of conformity with IEC 60825-1 Ed. 3, as
described in Laser Notice No. 56 dated May 8, 2019.
The use of operating elements or the implementation of
settings or processes which are not described in this user’s
guide may cause dangerous radiation exposure.
2
Safety notes
BOS R254K-UUI-L_1_-S4
Photoelectric Sensors