Balluff Network Interface / IO-Link
www.balluff.com
12
4
Configuration overview
Configuration
of the
extension port
The following devices may be connected to the extension port:
Configuration
Application
Device only
(extension port not active)
Device with identical device
Device with BNI IOL-751-V08-K007
Device with BNI IOL-751-V10-K007
Device with BNI IOL-751-V13-K007
The device connected to the extension port is referred to in the user's guide as the "second
device".
Note
The command for resetting to factory defaults (Factory reset) has no effect on the
configuration of the extension port.
Note
The process data length depends on the configuration.
The extension port can be configured using parameter 0x55. If data storage or validation is
used, configuration for validation must follow (compatible). Depending on the system the
device code may need to be entered (parameter data table) or the device code read from the
IODD.
