6
english
BIS V-830-3-011-B-00_ / BAM MD-IS-001-0005 / HF/LF-RFID-App (BIS M/L/C) /
BIS U-830-4-011-H-_/ BIS C-830-4-011-A / BIS M-830-4-011-A
Mobile RFID devices
1.1
Validity
This guide provides all of the information required to safely
use the mobile RFID devices and their components.
It applies to the following models:
–
BIS V-830-3-011-B-000
Ordering code: BIS01FU
Basic device without QR code scanner, without
camera, without NFC
–
BIS V-830-3-011-B-001
Ordering code: BIS01FW
Basic device with QR code scanner, with camera,
without NFC
–
BIS V-830-3-011-B-002
Ordering code: BIS01H2
Basic device with QR code scanner, with camera, with
NFC
–
BAM MD-IS-001-0005
Order code: BAM0421
Charging and transmission box, with power supply unit
–
BIS U-830-4-011-H-0
Ordering code: BIS01FY
UHF write/read module EU
–
BIS U-830-4-011-H-1
Ordering code: BIS01FZ
UHF write/read module US (USA/Canada)
–
BIS C-830-4-011-A
Order code: BIS01HE
LF plug-in module for BIS C read/write heads
(70/455 kHz)
–
BIS M-830-4-011-A
Order code: BIS01HC
LF/HF plug-in module for read/write heads
BIS VL (125 kHz) and BIS VM (13.56 MHz)
Read this guide and the other applicable documents
completely before installing and operating the product.
Original User’s Guide
This guide was created in German. Other language
versions are translations of this guide.
© Copyright 2023, Balluff GmbH
All content is protected by copyright. All rights reserved,
including the right to reproduce, publish, edit and translate
this document.
1.2
Other applicable documents
Additional information about this product can be found at
www.balluff.com
on the product page, e.g. in the
following documents:
– Data sheet
– Declaration of Conformity
– Disposal
1.3
Symbols and conventions
Individual action
instructions
are indicated by a preceding
triangle.
►
Instruction 1
Action sequences
are numbered consecutively:
1.
Instruction 1
2.
Instruction 2
Note, tip
This symbol indicates general notes.
1.4
Explanation of the warnings
Always observe the warnings in this guide and the
measures described to avoid hazards.
The warnings used here contain various signal words and
are structured as follows:
SIGNAL WORD
Type and source of the hazard
Consequences if not complied with
►
Measures to avoid hazards
The individual signal words mean:
NOTICE
Identifies a danger that could lead to
damage to or
destruction of the product
.
CAUTION
The general warning symbol together with the signal
word CAUTION indicates a hazard which can lead to
slight or moderate injuries
.
WARNING
The general warning symbol together with the signal
word WARNING indicates a danger which can lead to
severe injury or death
.
1.5
Technical terms and abbreviations used
BT
Bluetooth
DRM Dense Reader Mode
NFC
Near field communication
1
About this guide
Содержание BIS V-830-3-011-B-000
Страница 2: ...www balluff com...
Страница 4: ...www balluff com...
Страница 50: ......
Страница 52: ...www balluff com...