3
3
english
Contents
Safety Notes ............................................................................................................................... 4
Introduction BIS L-405 Identification System ........................................................................ 5/6
Application BIS L-405 Processor ......................................................................................... 7-12
CRC data check with BIS L-405-037-... Processor .......................................................... 13/14
Installation L-405 ................................................................................................................. 15/16
Installation L-405-...-001-... ..................................................................................................... 17
Installation L-405-...-002-... ..................................................................................................... 18
Installation L-405-...-003-... ..................................................................................................... 19
Installation L-405-...-004-... ..................................................................................................... 20
Installation ........................................................................................................................... 21/22
Reorienting and Rotating the Read Head ............................................................................... 23
Connection Diagrams ............................................................................................................... 24
Technical Data .......................................................................................................................... 25
Ordering Information ................................................................................................................ 26
Appendix, ASCII Table ............................................................................................................. 27
BIS L-405-03_-00_-05-MU_834487_E_0709.p65
4
english
4
Safety Notes
BIS L-4_ _ processor together with the other BIS L system components comprise the Iden-
tification System and may only be used for this purpose in industrial applications corre-
sponding to Class A of the EMC Directive.
Installation and operation are permitted by trained specialists only. Unauthorized modifica-
tions and improper use will result in loss of the right to make warranty and liability claims.
When installing the processor, follow exactly the connection diagrams provided later in this
document. Take special care when connecting the processor to external controllers, espe-
cially with respect to the selection and polarity of the connections including the power
supply.
Only approved power supplies may be used. For specific information, see the Technical
Data section.
When deploying the identification system, all relevant safety regulations must be followed.
In particular, measures must be taken to ensure that any defect in the identification system
does not result in a hazard to persons or equipment.
This includes maintaining the permissible ambient conditions and regular inspection for
proper function of the identification system and all the associated components.
At the first sign that the identification system is not working properly, it should be taken
out of service and guarded against unauthorized use.
This document applies to the processor BIS L-405-03_-00_-05-MU (Software version V1.2
and higher).
Scope
Malfunction
Installation and
operation
Deployment and
inspection
Proper use and
operation