Balluff BIS L-400 Series, Руководство пользователя

Страница: 4 / 32

Easy Loop Connection System
BIS L-400-... and BIS Z-EL-...
This manual describes the Easy Loop connection system with the components
BIS Z-EL-001-ETHERNET, BIS Z-EL-002-RS22, BIS L-00-0-0xx-02-S115 as well as
startup instructions for immediate use.
The manual is organized so that the sections build on each other.
Section 2: Basic safety information.
Section : The key steps for installing the Identification System.
Section : Introduction to the material.
Section 5: Technical data for the processor.
Section 6: Mechanical and electrical connection.
Section 7: Logging the processor on to the network.
Section 8: User-defined processor settings.
Section 9: Processor and host system interaction.
The following conventions are used in this manual:
Enumerations are shown as a list with em-dashes.
Entry 1,
Entry 2.
Action instructions are indicated by a preceding triangle. The result of an action is indicated by
an arrow.
Action instruction 1.
Action result.
Action instruction 2.
Numbers:
Decimal numbers are shown without additional indicators (e.g. 12),
Hexadecimal numbers are shown with the additional indicator
hex
(e.g. 00
hex).
Parameters:
Parameters are shown in italics (e.g. CRC_16).
ASCII characters:
The control characters in ASCII code are set in angle brackets (e.g. <CR>),
and the other ASCII characters are set in apostrophes (e.g. 'L').
Cross-references indicate where additional information on the topic can be found (see “Technical
Data” on page 19) .
Attention!
This symbol indicates a safety instruction that must be followed.
Note, tip
This symbol indicates general notes.
–
–
►
⇒
►
–
–
–
–
1.1 About this
manual
1.2 Manual
organization
1.3 Conventions
Enumerations
Actions
Syntax
Cross-references
1.4 Symbols
User Instructions
1