Balluff BIP LD2-T017-01-EP-S4 Series, Руководство пользователя

Страница: 58 / 212

6.15 Diagnostic data
The BIP reports diagnostic data (events) to the controlling
system (see Tab. 6-22), or the controlling system can read
out the status using the diagnostic parameters.
6.15.1 Diagnostic parameters
Index Subindex Parameter Size Access Values
0x0024 (36) 0 Device Status 1 Byte Read Only 0 = Normal state
2 = Warning
4 = Error
0x0025 (37) 0 Detailed Device
Status
18 Byte Read Only Up to 3 active events:
1st byte event type (0 = No event,
0xE4 = Warning, 0xF4 = Error)
2nd and 3rd byte event code (see Sec. 6.15.2)
Tab. 6-22: Diagnostic parameters
6.15.2 Event list
Event code Expression Meaning
0x8D02 Error OUT OF RANGE PLUS – The magnet is located outside of the detection range. No valid data
is output. The transmitted process data value is 32760.
0x8D03 Error OUT OF RANGE MINUS – The magnet is located outside of the detection range. No valid
data is output. The transmitted process data value is –32760.
0x8D04 Error NO MEASUREMENT DATA – No magnet detected. No valid data is output. The transferred
process data value is 32764.
0x4210 Warning DEVICE TEMPERATURE OVERRUN (see section 6.10.2) – The configured upper temperature
threshold is exceeded.
0x4220 Warning DEVICE TEMPERATURE UNDERRUN (see section 6.10.2) – The configured lower
temperature threshold is not met.
0x4000 Error TEMPERATURE OVERLOAD – The temperature has exceeded the specified maximum
temperature (+125°C). The heat source must be removed.
Tab. 6-23: Event list
6
IO-Link interface (continued)
26 english
BIP LD2-T017-01-EP _ _ / EP _ _ -S4
Inductive Positioning System