Page 4 of 4
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Cleaning & Care:
DO NOT use alcohol based products or spray polisher as finish damage may result.
Dust with a soft cloth.
STEP 3: ATTACH SUPPORT SLATS TO SIDE RAILS
Evenly space Support Slats (J) with ends on the ledge of the Side Rails (I). Use Screws (E) to firmly
secure each into place. NOTE: Slat without a Foot Support is placed nearest the Footboard to
ensure Support Foot is not visible after Bed is fully assembled.
STEP 4: ADJUST LEVELERS
If necessary, each Support Slat may be leveled by adjusting Leveler located under each Support Foot (J).
Carefully raise off floor and turn clockwise/counterclockwise to adjust.
(E)
(J)
(I)
(J)
