Page 3 of 7
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
NOTE: Assemble in intended area for use.
STEP 1:
Open lower drawer and install File Rods (B) into notches in drawer edge.
NOTE:
To prevent an accidental tip-over, a locking mechanism has been installed on the lower two
drawers which prevents both to be open at the same time. One drawer must be closed in order to
open the other.
(B)
STEP 2:
Install Glass Shelf (E) into upper compartment by inserting four Shelf Supports (A) at
desired height and gently laying shelf in place upon supports.
Add remaining four supports to drop-down desk compartment and gently lay in Desk Shelf (F).
NOTE:
The optional power strip may be removed by taking out screws and gently pulling cord
out through front of Cabinet.
Power Strip is NOT a surge protection device.
(E)
(F)