REVERSIBLE DOOR:
Change door swing (left/right) by using a Phillips Screwdriver to remove metal
Catch Plate, Magnet, Door Pull, and inside compartment, hinge connections. Move all hardware to
reversed positions and replace screws. See diagram below.
(E)
Cleaning and Care
Periodically dust with a soft, dry cloth.
Prevent finish damage: do not use alcohol based
cleaners or polishers. Promptly remove spills.
Page 2 of 3
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
SHELVES:
Insert Shelf Supports (B) into pre-drilled holes in upper compartment of Tower. Carefully set
Upper Shelves (D) level upon Supports. Next, insert Shelf Supports (B) into lower compartment then set
Lower (narrow) Shelf (E) level upon Supports.
(B)
(E)
Assemble in location for intended use.
(B)
(D)
(D)
