(G)
(F)
(E)
(D)
(A)
(I)
Page 4 of 4
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
STEP 3: Turn the Legs (I) upright and attach them to the Top (G) using the Large Screws (A),
Lock Washers (E), and Flat Washers (D). Tighten using the Allen Wrench (F). When
needed, the Leaf (H) can be inserted or removed by sliding the two sides of the Top
apart and aligning the dowels in the Top with the holes in the Leaf.
NOTE: Avoid moving the table after it is assembled to prevent injury or destruction.
(H)
