Page 2 of 3
Ltr.
A
2
B
2
Qty.
Hardware Included
Ltr.
C
1
Qty.
Components
REQUIRED TOOLS:
Phillips Screwdriver
Drill, Level, Pencil, Hammer
-Two person assembly suggested.
Remove all parts, hardware and
protective packaging from carton
and carefully arrange on a clean,
level, padded surface.
Wall Anchors
Screws
STEP 1: Determine location for installation then mark wall for bracket points (Page 3/Tempate Creation).
Optimal support provided when at least one Screw (B) is driven directly into a wall stud. No stud, create a
small hole and tap Wall Anchor (A) in until flush with wall surface. Add Screw (B) then carefully fit keyhole
over and push/pull Planter (C) down to secure in place.
(C)
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Planter (C)
Cleaning and Care
Periodically dust with a soft, dry cloth.
Prevent finish damage: do not use alchohol based
cleaners or polishers.
Assemble in location for intended use.
