Page 4 of 6
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
NOTE: Assemble desk in location for intended use.
STEP 1: Orient Base Cabinet (K) in preferred direction and remove top drawer. Next, gently lower
Desk Top (H) onto Base Cabinet and Leg (I). Place Leg on Apron end of Desk Top.
Apron
STEP 2: Assemble
Long
Allen Bolt (A), Lock Washer (C) and Flat Washer (D) and use to attach
Leg (I). Assemble
Short
Allen Bolt (B), Lock Washer (C) and Flat Washer (D) and use to attach
Base Cabinet (K) to Desk Top (H). Firmly tighten Bolts using Allen Wrench (E).
NOTE
: To aid in placement, do not fully tighten Bolts until all are threaded into place.
D
B
C
D
D
A
B C
(H)
(I)
(K)
(I)
(H)
(K)
Push Black Lever on each rail up on one side
and down on the other while pulling drawer out
TO REMOVE DRAWERS
LONG ALLEN BOLTS CONNECT LEG
MAY BREAK THROUGH TOP IF USED FOR CABINET
CAUTION
