Page 3 of 3
STEP 1:
(A)
(B)
(B)
(C)
(A)
NOTE: Before starting assembly of this Lamp, be sure it has been unplugged.
Turning the switch off is not sufficient enough.
STEP 2:
Screw the Glass Cover (B) onto the top of
the Lamp Fixture (A), over the Bulb, until
snug.
STEP 3:
Place the Shade (C) over the Glass Cover (B).
Screw in Bulb. This Lamp has been rated
for up to a 60 Watt MAX Type A Bulb
(NOT Included).
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Cleaning & Care:
To clean, wipe the Fixture with a soft, dry cloth.
Avoid the use of harsh or abrasive
chemicals as they may damage the finish.
