Page 4 of 5
STEP 5: Slide the Back Supports (N) into the pockets on the edge of the Back Cover (M).
Slide the Seat Supports (P) into the pockets on the edge of the Seat Cover (O).
STEP 6: Insert the assembled Seat Cover (O) and Back Cover (M) inside channels on the sides of the
Chair Frame (L). Tighten the 25mm Allen Bolts (C) through the inside of the Chair Frame (L)
and into the Nuts (D) on the outside of the Frame (L). Use both Allen Wrenches (F) to hold
and tighten the Nuts (D) and Bolts (C).
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(O)
(P)
(N)
(M)
Channel
(D)
(C)
(L)
(O & P)
(O & P)
(M & N)
(M & N)
(L)
