800.367.2810
www.ballarddesigns.com
STEP 1:
Feet Assembly
STEP 2:
Side Rail Installation
Page 2 of 5
2010 Ballard Designs, Inc.
Twist in the Feet (J) to the Headboard (D) and Footboard (E).
Release the Pre-installed Bolt (B) out of the Side Rail (F) using the Tool (C) provided. Then, with
your hand, screw in the shorter side of the Bolt (B) into the center slot of the Headboard (D).
Slide the Side Rail (F) into the Headboard with the cam lock and Wood Support Rails (G) holders
facing inward. Tighten the cam lock with the Tool (C) and repeat this process on all 4 corners.
(J)
(J)
Smaller Side, screwed
into Headboard
(F)
(F)
(E)
(D)
(D)
(D)
(C)
(C)
(B)
(B)
