ASSEMBLY:
It may be helpful to lay Cabinet (D) onto its back onto a level, padded surface. Next,
align holes in top of Base (E) with embedded T-nuts in bottom of Cabinet. Insert an Allen Bolt (A) into
each hole. Fit and insert ALL Bolts before fully tightening each using Allen Wrench (B).
ADJUSTABLE SHELVES:
Shelves ship pre-installed. To remove, first use a Phillips Screwdriver to
remove Set Screw from each Shelf Support. Next, carefully lift out Shelf. Reposition Shelf Supports,
replace Shelf then reinsert and tighten Set Screws.
LEVELERS:
Sideboard is equipped with Rotary Levelers installed under Base. If necessary, adjust-
ments may be made by carefully lifting applicable corner and turning Leveler clockwise/counterclockwise.
Page 3 of 5
(E)
(D)
(D)
Shelf
Support
(B)
(A)
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Assemble in location for intended use.