Page 2 of 4
REQUIRED TOOLS:
Phillips Screwdriver, Pencil, Level,
Drill with 3/8” bit
-Two person assembly suggested.
Remove all parts, hardware and
protective packaging from carton
and carefully arrange on a clean,
level, padded surface.
WARNING
Falling Hazard
WALL SHELF MUST BE ADEQUATELY SUPPORTED
AT LEAST ONE SCREW SHOULD BE DRIVEN INTO A WALL STUD
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Ltr.
A
2
B
1
Qty.
Hardware Included
Ltr.
C
1
Qty.
Components
Screws
M4 x 40mm
Expansion Bolt
M5 x 52mm
Wall Shelf (C)
Hardware
Packet
Cleaning and Care
Periodically dust with a soft, dry cloth.
Prevent finish damage: do not use alchohol based
cleaners or polishers.
STEP 1: Determine location for Shelf (C) then use a level and pencil to mark wall (Fig. 1).
TIP: See Page 4 for creating an easy Keyhole Template.
NOTE: Maximum support is provided when at least one Screw (A) is anchored directly into a wall
stud. For location where no wall stud is present, use Expansion Bolt (B) (Fig. 2 Page 3)
Fig. 1
WALL
STUD
Optimal support is provided when Wall Decor
is anchored directly into a Wall Stud.
Keyholes on back of
Shelf are 28.6” apart.
Assemble in location for intended use.