Page 3 of 3
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
ANTI TIP INSTALLATION:
PART B
Ltr. Qty.
Hardware Included
F
2
G
2
H
4
I
2
Small Screw
Large Screw
Brackets
Retention Belt
C
Cleaning & Care:
DO NOT use alcohol based products or spray polisher as finish damage may result.
Dust with a soft cloth.
Serious or fatal crushing injuries can occur from a furniture tip-over
WARNING
Tip-Over Hazard
WALL BRACKET MUST BE ATTACHED TO WALL STUD
Prevent tipping accidents. Anchor your furniture.
1. Locate and mark a Wall Stud behind Console at location for installation.
2. Corresponding to Stud location, attach one Bracket (H) to back of Console using Small Screw (F).
3. To keep hardware out of view after installation, attach remaining Bracket (H)
INTO WALL STUD
with Large Screw (G) 2 inches below Bracket attached to back of Console.
4. Move Console into place, align Brackets then connect both using Retention Belt (I).
5. Confirm Strap is securely laced and locked.
Anti-Tip Hardware Installation
(F)
(I)
(H)
(H)
(G)
Wall Stud