800.367.2810
www.ballarddesigns.com
STEP 1:
Rail Installation
Page 2 of 3
2010 Ballard Designs, Inc.
Flip the Table Top (F) upside down on the floor with the protective wrapping intact.
Then place the Legs (G) on the Top (F).
Install the Rail (H) into the legs with the pre-installed pegs.
Using the Long Bolts (C) and the Small Washers (D), attach the
Rail to the Legs. Be sure the Rail is installed so the bolt holes will not be seen.
(H)
(G)
(G)
(F)
(D)
(C)