Page 3 of 3
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
STEP 1:
Determine installation location, then identify two *wall studs behind Bookcase (C). Push Book-
case into place then slide each L-Bracket (A) over top of unit and center in front of each *wall stud. Use
pencil to mark wall at top of each Bracket.
IMPORTANT: Orient Brackets as illustrated to ensure they are not visible after installation.
(C)
(A)
(B)
Wall Studs
*Brackets MUST be anchored to a wall stud.
Pencil mark here
(A)
WALL
STUD
STEP 2:
Pull Bookcase away from wall, align L-Brackets (A) with marks on wall then anchor L-Bracket
directly into wall stud using four Screws (B).
STEP 3:
Move Bookcase back into place and slide under both L-Brackets (A). Attach using Screws (B)
and a Phillips Screwdriver to firmly tighten. NOTE: Floor molding may prevent all holes from covering
top, install Screws those holes which cover top.
Wall Stud
(A)
(B)
