Page 3 of 6
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(B)
(C)
(A)
(H)
(I)
(A)
(C)
(B)
(H)
STEP 1: Carefully invert Top (I) onto a clean, level, padded surface. Set each Leg (H) into place with
pre-drilled hole oriented toward back as illustrated below. Align holes in Leg with t-nuts embedded in
Top then insert Bolts (A), Lock Washers (C) and Flat Washers (B) into all holes in the order shown.
NOTE: DO NOT TIGHTEN BOLTS AT THIS STAGE OF ASSEMBLY. Leave loose to permit legs to
move.
Pre-drilled hole
