Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Page 2 of 2
Ltr.
A
2
B
2
Qty.
Hardware Included
Ltr.
D
1
Qty.
Components
C
2
TOOLS NEEDED:
-Screwdriver
-Two person assembly suggested.
Remove all parts, hardware and
protective packaging from carton
and carefully arrange on a clean,
level, padded surface.
NOTE:
To avoid accidentally
discarding small parts or hardware,
retain all carton contents until
assembly and installation are complete.
Large Screws
Brackets
Retention Belt
Bookcase
Using Large Screws (A), attach each Bracket (B) to wall approximately one inch lower than
D-Rings attached to back of Bookcase (D). NOTE: For maximum support, at least one Bracket
should be attached to a wall stud. Slide Bookcase against wall and align D-Rings and Brackets
then attach each together using Retention Belt (C). Confirm Belt is securely laced and locked.
Cleaning & Care:
DO NOT use alcohol based products or spray polisher as finish damage may result.
Dust with a soft cloth.
