Page 2 of 3
Ltr.
A
2
Qty.
Hardware Included
Ltr.
B
1
Qty.
Components
REQUIRED TOOLS:
Phillips Screwdriver
-Two person assembly suggested.
Remove all parts, hardware and
protective packaging from carton
and carefully arrange on a clean,
level, padded surface.
Serious or fatal crushing injuries can occur from a furniture tip-over
Tip-Over Hazard
Prevent tipping accidents. Anchor your furniture.
WARNING
ANCHORING HARDWARE INCLUDED
Console (B)
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Wall Anchoring
Anti-tip Kits
See Page 3
LEVELERS:
Nightstand is equipped with Rotary Levelers installed under each leg. If necessary, adjust-
ments may be made by carefully lifting applicable corner and turning Leveler clockwise/counterclockwise.
Shelf
Screwdriver
Screw
Hole
Shelf Supports
SHELVES:
Adjust Shelves by removing Set Screws from underside and removing Shelf from Supports.
Reposition Supports, replace shelf then reinsert and tighten Set Screws.
Cleaning and Care
Periodically dust with a soft, dry cloth.
Protect surfaces to prevent damage.
Do not use alchohol based cleaners or polishers.
LEVELER
Assemble in location for intended use.
