Page 3 of 4
STEP 1: Lay the Table Top (E) upside down on a padded, clean surface. Screw all four Table Legs (F)
into the corners on the Table Top. Do not overtighten.
STEP 2:
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Place the Table Base (G) on the Table Legs (F) and align the holes in the Base with the holes
in the Legs. Attach the Base to the Table Legs by screwing in the Hexagonal Bolts (A), Lock
Washers (B), and Flat Washers (C) into each corner using the Wrench (D). Carefully flip the
Table upright.
Make sure all Bolts are fully tightened before turning the Table upright.
(E)
(F)
(A)
(B)
(C)
(D)
(G)
(F)
